This equipment adopts new four-wheel continuous casting machine and continuous casting and rolling process to produce 9.5mm aluminum alloy rods (aluminum alloy grades are all 1 series, 3 series all, 6 series, 8 series), in the production of aluminum alloy rods, The induction heater ensures the process temperature requirement of the billet into the rolling, and has the heating regulation function of the ingot. The continuous rolling mill has the functions of active feeding and stacking rod parking, the continuous quenching device has the function of in-line quenching, and the outlet of the take-up duct is equipped with a water blowing device. In order to remove the moisture on the surface of the aluminum alloy rod, and at the same time, an active traction device is installed to ensure the smooth export of the aluminum alloy rod. The circular guide tube adopts a roller guiding structure to reduce the surface scratch of the aluminum alloy rod. The winding method is a centrifugal boring type. On the one hand, the aluminum alloy rod is pre-deformed before entering the take-up frame; on the other hand, if a broken rod occurs during the rolling process, the tail can automatically reach the take-up frame. It is not used to change the disc when it is changed, so as to ensure the continuous double-disc looping device to take up the line.

Simple process

Melting furnace (user-supplied) → holding furnace (user-supplied) → four-wheel continuous casting machine → straightening machine → front tractor → rolling shear machine → heater → feeding → continuous rolling mill → looping lower frame → aluminum Alloy rod

Finished product

Auxiliary machine

 

Heater

 

Continuous rolling mill

 

Shaft furnace + tilting furnace

Al-Alloy Continuous Casting and Rolling Line